From 03-2006 to 10-2006

NAVIGATION: MULTI-DISPLAY: REMOVAL

REMOVAL

1. EJECT MAP DISC
(a) Turn the power switch on (ACC).
(b) Push the "CLOSE" button.
(c) Touch "MAP EJECT" on the navigation screen to eject the map disc.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
5. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Removal
6. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Removal
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
8. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY Removal
9. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY





(a) Remove the 4 bolts.
(b) Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.
(c) Disconnect each connector and remove the navigation receiver with heater control panel assembly.
10. REMOVE RADIO NO. 1 BRACKET





(a) Remove the 5 bolts and radio No. 1 bracket.
11. REMOVE RADIO NO. 2 BRACKET





(a) Remove the 5 bolts and radio No. 2 bracket.
12. REMOVE NAVIGATION RECEIVER ASSEMBLY





(a) Remove the navigation receiver assembly as shown in the illustration.