Engine Immobiliser System

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC





(a) Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.

(b) Turn the power switch on (IG).
(c) Read the DTCs by following the directions on the tester screen.

HINT: Refer to the intelligent tester operator's manual for further details.

2. CLEAR DTC





(a) Connect the intelligent tester (with CAN VIM) to the DLC3.

(b) Turn the power switch on (IG).
(c) Erase the DTCs by following the directions on the tester's screen.

HINT: Refer to the intelligent tester operator's manual for further details.