Road Test
ROAD TEST1. PROBLEM SYMPTOM CONFIRMATION
a. Inspect the SET function.
1. Push the ON-OFF button on.
2. Drive at the required speed (40 km/h (25 mph) or higher).
3. Push the cruise control main switch to SET/-.
4. After releasing the switch, check that the vehicle cruises at the set speed.
b. Inspect the ACC (ACCEL) switch.
1. Push the ON-OFF button on.
2. Drive at the required speed (40 km/h (25 mph) or higher).
3. Push the cruise control main switch to SET/-.
4. Check that vehicle speed increases while the cruise control main switch is pushed to RES/+, and that the vehicle cruises at the newly set speed when the switch is released.
5. Push the cruise control main switch to RES/ACC and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).
c. Inspect the COAST function.
1. Push the ON-OFF button on.
2. Drive at the required speed (40 km/h (25 mph) or higher).
3. Push the cruise control main switch to SET/-.
4. Check that vehicle speed decreases while the cruise control main switch is pushed to SET/-, and that the vehicle cruises at the newly set speed when the switch is released.
5. Push the cruise control main switch to SET/-, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).
d. Inspect the CANCEL function.
1. Push the ON-OFF button on.
2. Drive at the required speed (40 km/h (25 mph) or higher).
3. Push the cruise control main switch to SET/-.
4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depressing the brake pedal
- Moving the shift lever to any position except D (5th, and 4th gears)
- Pushing the ON-OFF button off
- Pulling the cruise control main switch to CANCEL
e. Inspect the RES (RESUME) function.
1. Push the ON-OFF button on.
2. Drive at the required speed (40 km/h (25 mph) or higher).
3. Push the cruise control main switch to SET/-.
4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depressing the brake pedal
- Moving the shift lever to any position except D (5th, and 4th gear)
- Pulling the cruise control main switch to CANCEL
5. After pushing the cruise control main switch to RES/+ at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.