Symptom Related Diagnostic Procedures

PROBLEM SYMPTOMS TABLE

If a normal code is displayed during the diagnostic trouble code check but the trouble still occurs, check the circuits for each symptom in the order given in the table and proceed to the relevant troubleshooting.


HINT: The matrix chart is divided into 3 chapters.





Chapter 1 : Electronic circuit matrix chart

Part 1:

Part 2:

Chapter 2 : On-vehicle repair matrix chart

Part 1:

Part 2:

Chapter 3 : Off-vehicle repair matrix chart

- If the instruction "Proceed to next circuit inspection shown on matrix chart" is given in the flow chart for each circuit, proceed to the circuit with the next higher number in the table to continue the check.

- If the trouble still occurs even though there are no abnormalities in any of the other circuits, then check and replace the ECM.