Throttle Body: Service and Repair

Throttle Body:

REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE AIR CLEANER CAP




3. REMOVE THROTTLE BODY
a. Disconnect the throttle control motor connector.
b. Disconnect the 2 water bypass hoses from the throttle body.
c. Disconnect the EVAP hose from the throttle body.
d. Remove the 4 bolts and disconnect the throttle body from the intake manifold.
e. Remove the gasket.

INSTALLATION




1. INSTALL THROTTLE BODY
a. Install the new gasket and the throttle body with the 4 bolts.

Torque: 30 N.m (305 kgf.cm, 22 ft.lbf)

b. Connect the EVAP hose to the throttle body.
c. Connect the 2 water bypass hose to the throttle body.
d. Connect the throttle control motor connector.

2. INSTALL AIR CLEANER CAP
3. FILL WITH ENGINE COOLANT
4. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS