P0441

DTC P0441 Evaporative Emission Control System Incorrect Purge Flow

DTC Detection Condition:

CIRCUIT DESCRIPTION
The vapor pressure sensor, VSV for canister closed valve (CCV), VSV for pressure switching valve are used to detect abnormalities in the evaporative emission control system.

The ECM decides whether there is an abnormality in the evaporative emission control system by the vapor pressure sensor signal.

DTC's P0441 and P0446 are recorded by the ECM when evaporative emissions leak from the components within the dotted line in Fig. 1, or when there is a malfunction anywhere in the VSV for EVAP, the VSV for pressure switching valve, or in the vapor pressure sensor itself.

Wiring Diagram:

INSPECTION PROCEDURE

HINT:
- If DTC P0441, P0446, P0450 or P0451 is output after DTC P0440 or P0442, first troubleshoot DTC P0441, P0446, P0450 or P0451. If no more malfunction is detected, troubleshoot DTC P0440 or P0442 next.
- Read freeze frame data using hand-held tester or OBD II scan tool, as freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, it is useful for determining whether the vehicle was running or stopped, the engine was warmed up or not, the air-fuel ratio was lean or rich, etc. at the time of the malfunction.

Step 1 - 5:

Step 6 - 10:

Step 10 (Continued) - 12:

Step 13 - 15:

Step 15 (Continued) - 17:

Step 18 - 20:

Step 21 - 23:

Step 24 - 25:

Step 25 (Continued) - 27:

Hand-held tester:

Step 1 - 2:

Step 3 - 7:

Step 8 - 11:

Step 12 - 14:

Step 14 (Continued) - 17:

Step 17 (Continued) - 19:

Step 20 - 22:

OBD II scan tool (excluding hand-held tester):