DTC 11

DTC 11 ABS Solenoid Valve Relay Circuit





Circuit Description
The solenoid relay supplies power to each ABS solenoid. After the ignition switch is turned ON, if the initial check is OK, the relay goes on. The motor relay supplies power to the ABS pump motor. While the ABS is activated, the ECU switches the motor relay ON and operates the ABS pump motor.

Fail safe function: If trouble occurs in the control (solenoid) relay circuit, the ECU cuts off current to the ABS solenoid relay and prohibits ABS control.

HINT: When DTC 13 is output, check that the pump motor ground wire is installed correctly.

Diagnostic Chart:

Wiring Diagram:

Inspection Procedure

Step 1: