Valve Body: Testing and Inspection

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSPECTION; 2013 MY FR-S [03/2012 -]

1. INSPECT SHIFT SOLENOID VALVE S1

(a) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(b) Connect the positive (+) lead to the terminal of the shift solenoid valve S1 connector, and the negative (-) lead to the shift solenoid valve S1 body.

OK:

The solenoid makes an operating sound.

If the result is not as specified, replace the shift solenoid valve S1.

2. INSPECT SHIFT SOLENOID VALVE S2

(a) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(b) Connect the positive (+) lead to the terminal of the shift solenoid valve S2 connector, and the negative (-) lead to the shift solenoid valve S2 body.

OK:

The solenoid makes an operating sound.

If the result is not as specified, replace the shift solenoid valve S2.

3. INSPECT SHIFT SOLENOID VALVE S3

(a) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(b) Connect the positive (+) lead to the terminal of the shift solenoid valve S3 connector, and the negative (-) lead to the shift solenoid valve S3 body.

OK:

The solenoid makes an operating sound.

If the result is not as specified, replace the shift solenoid valve S3.

4. INSPECT SHIFT SOLENOID VALVE S4

(a) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(b) Connect the positive (+) lead to the terminal of the shift solenoid valve S4 connector, and the negative (-) lead to the shift solenoid valve S4 body.

OK:

The solenoid makes an operating sound.

If the result is not as specified, replace the shift solenoid valve S4.

5. INSPECT SHIFT SOLENOID VALVE SR

(a) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(b) Connect the positive (+) lead to the terminal of the shift solenoid valve SR connector, and the negative (-) lead to the shift solenoid valve SR body.

OK:

The solenoid makes an operating sound.

If the result is not as specified, replace the shift solenoid valve SR.