Removal

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: REMOVAL; 2013 MY FR-S [03/2012 -]

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

2. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal

3. DRAIN AUTOMATIC TRANSMISSION FLUID

(a) Remove the drain plug and gasket, and drain the ATF.

(b) Install the drain plug and a new gasket.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Removal

5. REMOVE TRANSMISSION OIL CLEANER MAGNET Removal

6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY Removal

7. DISCONNECT TRANSMISSION WIRE Removal

8. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Remove the bolt, detent spring cover and the detent spring.





(b) Remove the 19 bolts and the transmission valve body assembly.





(c) Disconnect the manual valve connecting rod sub-assembly from the manual valve lever sub-assembly.









(d) Remove the check ball body and the compression spring.









NOTICE:
Do not drop the check ball body and compression spring.