Removal

FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM: REMOVAL; 2013 MY FR-S [03/2012 -]

HINT
* The procedure listed below is for the LH side.
* Use the same procedure for the RH side and LH side.

1. REMOVE FRONT WHEEL

2. REMOVE REAR ENGINE UNDER COVER LH

(a) Remove the 3 clips and rear engine under cover LH.





3. REMOVE LOWER ARM SUPPORT PLATE

(a) Remove the bolt, nut and lower arm support plate.





4. SEPARATE TIE ROD END SUB-ASSEMBLY LH Removal

5. SEPARATE STEERING KNUCKLE LH Removal

6. REMOVE FRONT LOWER SUSPENSION ARM ASSEMBLY LH

(a) Remove the bolt, nut and front lower suspension arm assembly LH from the front cross member sub-assembly.





7. REMOVE FRONT LOWER SUSPENSION ARM BOLT

(a) Using SST, remove the front lower suspension arm bolt.





SST : 09726-18011