Installation

FA20 LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.









Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(b) Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

NOTICE:
Do not start the engine for at least 1 hour after installation.

(c) Connect the engine oil pressure switch connector.

2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

4. INSPECT FOR OIL LEAK

(a) Start the engine.

(b) Check for engine oil leaks from the engine oil pressure switch assembly.

5. CHECK ENGINE OIL LEVEL Testing and Inspection