Vacuum Pump: Testing and Inspection

BRAKE SYSTEM (OTHER): VACUUM PUMP: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL VACUUM PUMP ASSEMBLY

(a) Coat a new O-ring with engine oil, and install it.

(b) Apply seal packing in a continuous line as shown in the illustration.









NOTICE:
* Clean and degrease the contact surface.
* Install the vacuum pump assembly within 5 minutes of applying seal packing.

HINT
When replace the vacuum pump assembly on the vehicle, apply seal packing to the vacuum pump assembly.

(c) Install the vacuum pump assembly while aligning the grooves of the vacuum pump assembly with the claws of the intake camshaft RH.









NOTICE:
Make sure that the O-ring is not pinched.

(d) Install the 3 bolts.

Torque : 16 Nm (163 kgf-cm, 12 ft-lbf)

2. INSTALL VACUUM TUBE CONNECTOR HOSE

(a) Install the vacuum tube connector hose.

3. INSTALL FRONT SUSPENSION UPPER TO COWL BRACE SUB-ASSEMBLY RH

Installation