Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL REAR BUMPER COVER

(a) Insert the rear light harness to the luggage compartment room.

(b) Engage the 3 guides.





(c) Engage the 8 claws.





HINT
Use the same procedure for the RH side and LH side.

(d) Install the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(e) Install the rear bumper cover with the 8 clips.

(f) Connect the connector.

(g) Engage the clamp to install the rear light assembly harness.

2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH Installation

3. INSTALL LUGGAGE COMPARTMENT SIDE TRAY

4. INSTALL REAR FLOOR FINISH PLATE Installation

5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT