675B0

Fault Code 675B0





Malfunction indicated
Calibration not completed

Fault symptom
TCS CTRL lamp on.

Test procedure

Note: The engine must be at normal operating temperature and the pedals must not be touched during calibration.

1 Clear the fault code and enter command code 973 for recalibration (the TCS CTRL lamp lights up).

2 If calibration cannot proceed, check the brake light switch and the switches for the brake and clutch.

3 Enter SAT command code 280. The display should now show 80000.
If not, check the speedometer and the leads connected to it.

For a more detailed description of the calibration procedure, see Calibration of TCS. Calibration of TCS