Preparation For Test

PRELIMINARY WORK: Diagnosis - Pull codes.

Preparation for Test
- Ignition OFF.
- Connect socket box with test harness to EZL/AKR ignition control unit (N1/3) according to connection diagram.

NOTES:
- When performing test and adjustment work, the engine rpm should only be raised using the accelerator pedal. If the engine speed is raised via the control linkage in the engine compartment, the "limp-home" mode will become active and will be registered in the electronic accelerator malfunction memory as a fault. The acceleration slip regulation (ASR) malfunction indicator lamp will also come on.

- Regarding "Test Connection" column, the numbers indicated in parentheses, for example, (A.2) signify:

A = Connector A,
2 = Socket 2 in wiring diagram.