Programming and Relearning

INSTRUMENT CLUSTER CONFIGURATION

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Module Programming".

3. Then, select items from the screen menu in the following order.
a. Select "Programmable Module Installation".

b. Select "IC".

4. Perform the configuration following the instructions on the screen.

5. Read-out the DTC using the M-MDS (IDS) and verify that the DTC is not output.

- If any DTC is present, perform the applicable DTC inspection. Instrument Cluster - DTC Table