Center Guide Rail Cover Removal/Installation

CENTER GUIDE RAIL COVER REMOVAL/INSTALLATION

1. Remove the following parts:
a. Rear scuff plate Rear Scuff Plate Removal/Installation

b. Sub-trunk Sub-Trunk Removal/Installation

c. Trunk end trim Trunk End Trim Removal/Installation

d. Third-row seat Rear - Third-Row Seat Removal/Installation

e. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

f. Cargo compartment light Service and Repair

g. Trunk side trim

h. Rear combination light Service and Repair

2. Remove the nuts A.






3. Remove the screw B.






4. Pull the center guide rail cover in the direction of the arrow shown in the figure.

5. Install in the reverse order of removal.