Clearing DTC

CLEARING DTC [AUDIO]

CAUTION:
- Before clearing the DTCs, be sure to enter all of the DTCs displayed in the DTC inspection in the Audio Repair Order Form.

With M-MDS

CMDTC memory clearing procedure

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Self Test".

b. Select "All CMDTCs".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition OFF (LOCK).

6. Switch the ignition ON and wait for 5 s or more.

7. Perform DTC inspection. DTC Inspection - Audio

8. Verify that no DTCs are displayed.

ODDTC memory clearing procedure

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Self Test".

b. Select "Modules".

c. Select "ACU".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition OFF (LOCK).

6. Switch the ignition ON and wait for 5 s or more.

7. Perform DTC inspection. DTC Inspection - Audio

8. Verify that no DTCs are displayed.

Without M-MDS (On-board Diagnostic Test Mode)

1. Launch the on-board diagnostic test mode. DTC Inspection - Audio

2. While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for 3 s or more.






3. Switch the ignition OFF (LOCK) to stop the on-board diagnostic test mode.