Audio Unit Removal/Installation

AUDIO UNIT REMOVAL/INSTALLATION

CAUTION:
- When installing the audio unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.
- Pressing the switch area of the audio unit when installing it could result in a malfunction. Therefore only press the hatched area shown in the figure.






1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Center console box Center Console Box Removal/Installation

c. Console panel Console Panel Removal/Installation

d. Center console Center Console Removal/Installation

e. Shift lever knob (MTX) Service and Repair

f. Selector lever knob (ATX) Automatic Transaxle Shift Mechanism Removal/Installation

g. Shift panel Shift Panel Removal/Installation

h. Front console Front Console Removal/Installation

i. Climate control unit Service and Repair

j. Upper column cover Service and Repair

k. Instrument cluster Removal and Replacement

l. Switch panel Service and Repair

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.