Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Roof side trim Roof Side Trim Removal/Installation

b. A-pillar trim A-Pillar Trim Removal/Installation

c. Rear seat Rear Seat Removal/Installation

d. Inner scuff plate Inner Scuff Plate Removal/Installation

e. Tire house trim Tire House Trim Removal/Installation

f. Rear pillar trim Rear Pillar Trim Removal/Installation

g. Map light Service and Repair

h. Interior light Service and Repair

i. Sunvisor Service and Repair

j. Assist handle Service and Repair

k. Headliner Service and Repair

3. Disconnect the sunroof motor connector.






4. Remove the screws, then remove the sunroof motor.

5. Install in the reverse order of removal.

NOTE:
- If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required.Perform initial position setting referring to the Sunroof Motor Assembly Note. Overhaul