Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

e. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

f. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

g. Rear package tray lid Service and Repair

h. Sub-trunk Service and Repair

i. Third-row seat Third-Row Seat Removal/Installation

j. Rear header trim Rear Header Trim Removal/Installation

k. Trunk end trim Trunk End Trim Removal/Installation

l. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

m. Cargo compartment light Service and Repair

n. Trunk side trim

o. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

p. C-pillar trim C-Pillar Trim Removal/Installation

q. Map light Service and Repair

r. Sunvisor Service and Repair

s. Assist handle Service and Repair

t. Headliner Headliner Removal/Installation

4. Disconnect the sunroof motor connector.






5. Remove the screws, then remove the sunroof motor.

6. Install in the reverse order of removal.

NOTE:
- If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required. Perform initial position setting referring to the Sunroof Motor Assembly Note. Overhaul