Headlamp Wiper Motor: Service and Repair

HEADLIGHT CLEANER ACTUATOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Removal and Replacement.)

3. Remove the headlight cleaner nozzle. (See Headlight Cleaner Nozzle Removal.)(See Headlight Cleaner Nozzle Installation.)

4. Squeeze the clip tabs and slide the clip in the direction of the arrow.

5. Disconnect headlight cleaner hose from the headlight cleaner actuator.






6. Remove the screw, then remove the headlight cleaner actuator.

7. Install in the reverse order of removal.