Radiator Cooling Fan Motor: Testing and Inspection

FAN MOTOR INSPECTION [13B-MSP]

Part Inspection

1. Verify that the battery is fully charged. Testing and Inspection

2. Disconnect the cooling fan motor connector (4 terminals).

3. Install a tester and battery to the cooling fan motor connector (4 terminals) as shown in the figure.






4. Verify that each fan motors operate smoothly at the standard current.

- If there is any malfunction, replace the applicable part.

Cooling fan motor No.1, No.2 standard current
- 7.7-10.7 A [12V]