13: All Lights Relating to ABS and TCS Do Not Illuminate

ALL LIGHTS RELATING TO ABS AND TCS DO NOT ILLUMINATE





Description

Diagnostic Procedure





Step 1 - 5





Step 6

- When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, check to make sure connectors. Terminals and wiring harness are connected correctly and undamaged.

Caution Recheck the diagnostic trouble code after repair completion.

Note If any symptoms have occurred in the past but are now okay, poor harness could be the possible cause and thus ABS CM is normal.