With New Generation Star Tester (NGS)

After-Repair Procedure
1. Clear the diagnostic trouble code memory by using the Special Service Tool (SST) New Generation Star (NGS).
- Connect the NGS to the data link connector-2.
- Select "CLEAR" function and erase diagnostic trouble codes from the PCM memory.





2. Remove the SST (NGS) from the date link connector-2.





3. Drive the vehicle at 50 km/h (3l mph), and depress the accelerator pedal fully to activate kickdown. Stop the vehicle gradually.
4. Connect the SST (NGS) to the date link connector-2 and battery.
5. Turn the ignition switch to ON.
6. Verify that no diagnostic trouble codes are displayed.
7. Remove the SST from the date link connector-2.