Quick Diagnosis Chart

QUICK DIAGNOSIS CHART I

Part 1 Of 2:

Part 1 of 2

Part 2 Of 2:

Part 2 of 2


QUICK DIAGNOSIS CHART II

Part 1 Of 2:

Part 1 of 2

Part 2 Of 2:

Part 2 of 2

OUTLINE

NOTE: The QUICK DIAGNOSIS CHART shows various problems and the various components that might be the cause of the problem.

1. Components indicated in the "On-board diagnostic" line of the QUICK DIAGNOSIS CHART (I) are diagnosed by the powertrain control module on-board diagnostic function. NGS can be used for easy retrieval of the diagnostic trouble code numbers.
2. Components indicated in the "Adjustment" line of the QUICK DIAGNOSIS CHART (I) indicate that there is a possibility that the problem may be the result of an incorrect adjustment.
^ Check the adjustment of each component, and readjust if necessary.

3. Input and output signals of the powertrain control module for the components indicated in the NGS line of the QUICK DIAGNOSIS CHART (I) can be easily checked by using the NGS.
4. Components indicated in the "Line Pressure Test" line of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the line pressure test.
5. Components indicated in the "Stall Test" line of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the stall test.
6. Components indicated in the "Road Test" line of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the road test.
7. QUICK DIAGNOSIS CHART (11) shows the relationship between the troubleshooting item and inspection point.