Flow Chart 3 - Lamp Flashes Five Times

Flowchart No. 3

Step 1
1. Disconnect the negative battery cable.





2. Disconnect the diagnostic module connectors and connect the SST to it as shown in the figure.

Step 2








- Check for continuity between terminals 1 N (B/G) and 2D (B/L) of the diagnostic module connector.

Step 3

1. Disconnect the D-sensor connectors (center, RH, and LH).








2. Measure the resistance between terminals A and B of the D-sensor.

Step 4








- Measure the resistance between the terminals of the diagnostic module connector.

Step 5
1. Disconnect the D-sensor connectors (center, RH, and LH).








2. Check for continuity between terminals C and D of the D-sensor.