Fluid - M/T: Testing and Inspection
TRANSAXLE OIL INSPECTION1. On level ground, jack up the vehicle and support it evenly on safety stands.
2. Remove the oil level plug and washer.
3. Verify that the oil level is near the lower edge of the plug port.
4. If the oil level is low, add the specified amount and type of oil through the plug port.
Specified Oil Grade: API Service GL-4 or GL-5
Specified Oil Viscosity:
All-Season: SAE 75W-90
Above 10°C (50°F): SAE 80W-90
5. Install a new washer and the oil level plug.
Tightening torque:
40-58 N.m (4.0-6.0 kgf.m, 29-43 ft.lbf)