Fluid - M/T: Testing and Inspection

1. Park the vehicle on level ground.
2. Disconnect the speedometer cable and remove the speedometer driven gear.
3. Verify that the oil level is between the F and L.




4. If the oil level is low, add the specified oil through the speedometer driven gear hole.

Capacity: 2.68 L (2.83 US qt, 2.36 Imp qt)

5. Install the speedometer driven gear.

Tightening torque: 1.9-11.2 N.m (80-115 kgf.cm, 70-99 in.lbf)

6. Connect the speedometer cable.