Fender Splash Shield - RH

Fender Splash Shield - RH









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the battery. For additional information, refer to Battery.

3. Remove the windshield washer reservoir. For additional information, refer to Wiper and Washer Systems.

4. Remove the battery tray bolt.
- To install, tighten to 12 Nm (106 lb-in).

5. Remove the 2 bolts and the fender splash shield.
- To install, tighten to 12 Nm (106 lb-in).

6. To install, reverse the removal procedure.