Test L: One Turn Signal/Hazard Lamp Is Inoperative/Always On
PINPOINT TEST L: ONE TURN SIGNAL/HAZARD LAMP IS INOPERATIVE/ALWAYS ONNormal Operation
When the multifunction switch is placed in the LH or RH TURN position, voltage is routed through circuit 3 (LG/WH) or circuit 2 (WH/LB) to the LH or RH front turn signal. Ground for the turn lamps is provided through circuit 57 (BK).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Multifunction switch
L1-L3:
L3-L4:
