Test J: An Individual Button/Feature Is Inoperative From the Remote Keyless Entry (RKE) Transmitter

PINPOINT TEST J: AN INDIVIDUAL BUTTON/FEATURE IS INOPERATIVE FROM THE REMOTE KEYLESS ENTRY (RKE) TRANSMITTER

Normal Operation
Remote locking and unlocking of the doors, releasing the luggage compartment lid, and activation of the panic alarm is accomplished by the driver door module (DDM) receiving a command message from the remote keyless entry (RKE) transmitter. The DDM processes the command and energizes the appropriate relays to lock or unlock the doors, open/close the luggage compartment lid, or sends a message over the standard corporate protocol (SCP) network to the lighting control module (LCM) to activate the parking lamps and horn for the panic alarm.

The LCM will disable the PANIC feature if the ignition key is in any position other than OFF or LOCK.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Door locks
- Horn system
- Luggage compartment lid release system
- Parking lamps
- RKE transmitter
- LCM
- DDM

J1-J7:

J8-J12: