Test D
PINPOINT TEST D: DTC C1095-ABS HYDRAULIC PUMP MOTOR CIRCUIT FAILURETests D1 - D3:
Test D4:
Normal Operation
The operating voltage required to run the hydraulic pump motor is in a range between 10 and 17 volts.
Voltage is supplied by circuit 30-CF13 (RD) (power hot at all times). Ground is provided through circuit 31-CF6A (BK/YE) and 31-CF6B (BK/YE).
Possible Causes
^ ground circuit 31-CF6A (BK/YE) or 31-CF6B (BK/YE)
^ power supply circuit 30-CF13 (RD)
^ hydraulic pump motor
^ ABS module
CAUTION: Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.