Test X: LFC 36/DTC B1995 - Driver Seat Side Air Bag Circuit Resistance Low

X1:

X2:

X3:

X4:

X4 - X5:

Normal Operation
The Restraints Control Module (RCM) monitors the resistance of the driver seat side air bag circuit loop and the air bag module igniter at RCM C310b pin 2 and 3. If the resistance is less than 0.7 ohms, the RCM will store Diagnostic Trouble Code (DTC) B1995 and Flash Lamp Fault Code (LFC) 36.

Possible Causes
A low resistance on the driver seat side air bag circuit can be caused by:
^ damaged wiring on circuit 30S-JA37 (RD/GN).
^ damaged wiring on circuit 31S-JA37 (BK/GN).
^ damaged driver seat side air bag module.
^ RCM is faulted.
^ damaged electrical connector shorting bar.
^ damaged electrical connector camming beam.