Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY





(a) Install the front seat inner belt assembly with the nut.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.





(b) for Driver Seat:

Connect the 3 connectors and attach the 5 clamps.

(c) for Passenger Seat:

Connect the 2 connectors and attach the clamp.

2. INSTALL FRONT SEAT ASSEMBLY Installation

3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL BATTERY SERVICE HOLE COVER LH Installation

6. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

7. CHECK SRS WARNING LIGHT Installation

8. INSPECT FRONT SEAT ASSEMBLY Installation