Removal

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER (for Rear Side): REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
* w/ Navigation System (for HDD):
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE REAR SEAT ASSEMBLY (for Ottoman)

Remove the rear seat Removal.

6. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

Remove the rear seat Removal.

7. REMOVE REAR SEAT ASSEMBLY (for Power Seat)

Remove the rear seat Removal.

8. REMOVE REAR DOOR SCUFF PLATE LH Removal

9. REMOVE REAR DOOR SCUFF PLATE RH Removal

10. REMOVE REAR SEAT SIDE GARNISH LH Removal

11. REMOVE REAR SEAT SIDE GARNISH RH Removal

12. REMOVE INNER ROOF SIDE GARNISH LH Removal

13. REMOVE INNER ROOF SIDE GARNISH RH Removal

14. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY Removal

15. REMOVE NO. 2 CLEARANCE WARNING BUZZER

(a) Disconnect the connector.





(b) Using a clamp remover, detach the claw and remove the warning buzzer.