Removal

HYBRID BATTERY CONTROL: HV RELAY ASSEMBLY: REMOVAL

1. REMOVE HV BATTERY

(a) Remove the HV battery from the vehicle Removal.

2. REMOVE NO. 6 HYBRID VEHICLE BATTERY SHIELD SUB-ASSEMBLY Removal

3. REMOVE BATTERY COOLING BLOWER ASSEMBLY (for Upper Side) Removal

4. REMOVE NO. 4 HYBRID BATTERY INTAKE DUCT Removal

5. REMOVE NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY Removal

6. REMOVE NO. 4 HYBRID VEHICLE BATTERY CARRIER BRACKET SUB-ASSEMBLY Removal

7. REMOVE BATTERY COOLING BLOWER ASSEMBLY (for Lower Side) Removal

8. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT Removal

9. REMOVE REAR HYBRID BATTERY WITH LABEL SHIELD Removal

10. REMOVE NO. 3 HYBRID BATTERY INTAKE DUCT Removal

11. REMOVE NO. 4 HYBRID VEHICLE BATTERY SHIELD REINFORCEMENT





CAUTION:
Be sure to wear insulated gloves.

(a) Remove the 3 nuts and No. 4 hybrid vehicle battery shield reinforcement.

12. REMOVE HYBRID BATTERY TERMINAL BLOCK





CAUTION:
Be sure to wear insulated gloves.

(a) Remove the 3 nuts, bolt and hybrid battery terminal block.

13. REMOVE HYBRID BATTERY JUNCTION BLOCK ASSEMBLY





CAUTION:
Be sure to wear insulated gloves.

(a) Disconnect the 8 connectors.

(b) Remove the 3 nuts and hybrid battery junction block assembly.

NOTICE:
Insulate the connectors of the removed high voltage wires with insulating tape.

14. REMOVE ELECTRIC VEHICLE FUSE





(a) Remove the 4 bolts and 2 electric vehicle fuses.