Removal

L110F HYBRID VEHICLE CONTROL: WATER PUMP WITH MOTOR: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER RH Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE FRONT CENTER FLOOR COVER Removal

4. REMOVE NO. 1 ENGINE UNDER COVER Removal

5. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR Removal

6. DRAIN COOLANT (for Inverter) Coolant (for Inverter)

7. REMOVE WATER PUMP WITH MOTOR AND BRACKET ASSEMBLY

(a) Disconnect the water pump connector.





NOTICE:
Wrap the connectors of the vehicle wire harness and the water pump with motor and bracket assembly to prevent coolant from contaminating the connectors.

(b) Remove the 2 clips and disconnect the 2 water pump hoses.

(c) Remove the 2 bolts and water pump with motor and bracket assembly.