Removal

2UR-FSE COOLING: WATER PUMP: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE ENGINE ROOM SIDE COVER RH Removal

4. REMOVE NO. 1 AIR CLEANER INLET Removal

5. REMOVE NO. 1 ENGINE UNDER COVER Removal

6. DRAIN ENGINE COOLANT Service and Repair

7. REMOVE RADIATOR RESERVOIR ASSEMBLY Removal

8. REMOVE INTAKE AIR CONNECTOR PIPE Removal

9. REMOVE V-RIBBED BELT Removal

10. DISCONNECT NO. 2 RADIATOR HOSE Removal

11. DISCONNECT WATER HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the water hose.





12. DISCONNECT WIRE HARNESS

(a) Remove the bolt and disconnect the wire harness.





13. DISCONNECT NO. 5 WATER BY-PASS HOSE

(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 5 water by-pass hose.





14. DISCONNECT WATER INLET HOSE

(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the water inlet hose.





15. DISCONNECT INLET HEATER WATER HOSE

(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the heater water hose.





16. REMOVE WATER INLET HOUSING

(a) Remove the 3 bolts, water inlet housing and gasket.





17. REMOVE WATER PUMP PULLEY

(a) Using SST, hold the water pump pulley.





SST : 09960-10010

09962-01000

09963-01000

(b) Remove the 4 bolts and water pump pulley.

18. REMOVE WATER PUMP

(a) Remove the 9 bolts, water pump and gasket.