Installation

2UR-FSE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

(a) Install a new gasket and the water inlet with thermostat with the 3 nuts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. CONNECT NO. 2 RADIATOR HOSE

(a) Connect the radiator hose.





HINT
The direction of the hose clamp is indicated in the illustration.

3. INSTALL RADIATOR RESERVOIR ASSEMBLY

(a) Install the radiator reservoir with the 2 bolts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the 2 reservoir hoses.

HINT
* The direction of the hose clamp is indicated in the illustration.
* Insert the hose into the stopper. Set the hose clamp so that the clearance between the hose clamp and stopper is within 2 to 7 mm (0.0787 to 0.276 in.).

4. ADD ENGINE COOLANT Service and Repair

5. INSPECT FOR COOLANT LEAK Testing and Inspection

6. INSTALL NO. 1 ENGINE UNDER COVER Installation

7. INSTALL NO. 1 AIR CLEANER INLET Installation

8. INSTALL ENGINE ROOM SIDE COVER RH Installation

9. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

10. INSTALL V-BANK COVER SUB-ASSEMBLY Installation