Installation

STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 claws and pin to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.

(b) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

(c) Engage the 2 claws and pin to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.

(d) Install the screw.

Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

2. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.