Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag with the 3 bolts, and attach the claw.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL LOWER INSTRUMENT PANEL

(a) Attach the clip and 2 claws to install the panel.





3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT SIDE PANEL RH Installation

5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Removal

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL BATTERY SERVICE HOLE COVER LH Installation

8. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light How To Proceed With Troubleshooting.