Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. REMOVE NO. 3 STEERING WHEEL COVER LOWER Removal

4. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. REMOVE STEERING COLUMN COVER Removal

8. REMOVE SPIRAL CABLE WITH STEERING SENSOR

(a) Disconnect the connectors from the spiral cable with steering sensor.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Detach the 3 claws and remove the spiral cable with steering sensor.

9. REMOVE SPIRAL CABLE

(a) Detach the 6 claws and remove the spiral cable.