Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

5. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

7. REMOVE INSTRUMENT SIDE PANEL RH Removal

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Remove the 3 bolts and front passenger side knee airbag.





(b) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.