Removal

2GR-FSE FUEL: FUEL PRESSURE PULSATION DAMPER: REMOVAL

1. PRECAUTION Removal

2. DISCHARGE FUEL SYSTEM PRESSURE Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE SERVICE PLUG GRIP Removal

5. REMOVE COOL AIR INTAKE DUCT SEAL Removal

6. REMOVE ENGINE ROOM SIDE COVER LH Removal

7. REMOVE ENGINE ROOM SIDE COVER RH Removal

8. REMOVE FRONT UPPER FENDER PROTECTOR LH Removal

9. REMOVE FRONT UPPER FENDER PROTECTOR RH Removal

10. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal

11. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal

12. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

14. REMOVE COWL TOP VENTILATION LOUVER SUB-ASSEMBLY

15. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

16. DISCONNECT NO. 2 VENTILATION HOSE Removal

17. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal

18. REMOVE FUEL PRESSURE PULSATION DAMPER

(a) Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.





SST : 09612-24014

09617-24011