Removal

2GR-FSE COOLING: THERMOSTAT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ENGINE UNDER COVER Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE NO. 1 AIR CLEANER INLET Removal

5. DRAIN ENGINE COOLANT (for Engine) Service and Repair

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

7. DISCONNECT RADIATOR HOSE OUTLET

8. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT





(a) Remove the 3 nuts, water inlet with thermostat and gasket.