Removal

WIPER AND WASHER: HEADLIGHT CLEANER ACTUATOR (for HID Headlight): REMOVAL

REMOVAL
HINT:
- Use the same procedures for both the RH and LH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT BUMPER COVER
(a) Remove the front bumper cover Removal.
2. REMOVE HEADLIGHT ASSEMBLY LH Removal
3. REMOVE HEADLIGHT CLEANER ACTUATOR

(a) Pull out the headlight cleaner actuator cover while making sure that the headlight cleaner actuator cover and holder do not separate from the headlight cleaner actuator, and hold the headlight cleaner actuator in place.
- If the holder separates from the headlight cleaner actuator, replace the headlight cleaner actuator.
- Hold the headlight cleaner actuator without touching the nozzle.

(b) Using nippers, cut off the headlight cleaner actuator cover as shown in the illustration, and remove it.
NOTICE:
If the holder is damaged when the headlight cleaner actuator cover is cut off, replace the headlight cleaner actuator.