Removal

REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL

REMOVAL

1. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR Removal
2. REMOVE NO. 1 DIFFERENTIAL SUPPORT PROTECTOR
HINT: Perform the same procedure as the No. 2 differential support protector.

3. LOOSEN BOLT (for LH Side)





(a) Loosen the bolt.
- Do not remove the bolt.
- Turn the bolt while holding the nut.

4. LOOSEN BOLT (for RH Side)
HINT: Perform the same procedure as the LH side.

5. REMOVE REAR STABILIZER LINK ASSEMBLY LH





(a) Remove the nut, and separate the rear stabilizer link assembly LH from the rear stabilizer bar.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.





(b) Remove the nut, bolt, and the stabilizer link assembly LH.
6. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedure as the LH side.

7. REMOVE REAR STABILIZER BAR





(a) Remove the 4 bolts, 2 stabilizer brackets, 2 rear stabilizer bushings, and rear stabilizer bar.