Air Suspension System

SUSPENSION CONTROL: AIR SUSPENSION SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Turn the power switch OFF.
(b) Connect the intelligent tester or Techstream to the DLC3.
(c) Turn the power switch ON (IG) and the tester ON.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / CHASSIS / AIR SUSPENSION / DTC INFO.
(2) Techstream - Select: Chassis / Air suspension / Trouble Codes.
(e) Read the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester or Techstream operator's manual for further details.

(f) Refer to the "DIAGNOSTIC TROUBLE CODE CHART" for DTC information Air Suspension System.
2. CLEAR DTC
HINT: After repairing the malfunctions, clear the DTCs.

(a) Turn the power switch OFF.
(b) Connect the intelligent tester or Techstream to the DLC3.
(c) Turn the power switch ON (IG) and the tester ON.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / CHASSIS / AIR SUSPENSION / DTC INFO.
(2) Techstream - Select: Chassis / Air suspension / Trouble Codes.
(e) Erase the DTCs by following the prompts on the tester screen.
HINT: Refer to the intelligent tester or Techstream operator's manual for further details.