Installation

AUDIO / VISUAL: RADIO RECEIVER: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.





1. INSTALL NO. 2 RADIO BRACKET
(a) Install the bracket with the 4 bolts.






2. INSTALL NO. 1 RADIO BRACKET
(a) Install the bracket with the 4 bolts.






3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Attach the 5 clips to install the panel.
4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
(a) Connect the connectors.






(b) Insert the radio receiver and attach the 4 clips on its backside.
NOTE: When inserting the radio receiver, do not press the knobs on it.





(c) Install the radio receiver with the 2 bolts.
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

6. INSTALL REAR UPPER CONSOLE PANEL Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL BATTERY SERVICE HOLE COVER LH Battery

13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY